Autoblog

Click above for high-res gallery of the BRABUS C63 AMG

BRABUS, the German tuner of all things Daimler, has laid its hands upon the C63 AMG and somehow teased out an additional 73 horsepower from the sedan's 6.2L V8. With a BRABUS badge on the back, the C63 AMG produces 530 hp and 479 lb-ft of torque, up from 457 and 442, respectively. Called the B63 S performance kit, the engine mods include free-flow high-performance metal catalysts, sport air filters and new programming for the ECU with custom mapping. With everything in place, the BRABUS C63 AMG can hit 62 mph in just 4.1 seconds and ultimately top out at 197 mph. Of course, the rest of the sedan has been beefed up to support the engine with components like a BRABUS performance brake system, 19-inch wheels and a height-adjustable BRABUS coil-over suspension. Finally, the German tuner has a whole catalogue of interior and exterior accessories to set your B63 S apart from stock C63 AMGs.


[Source: BRABUS, eMercedesBenz]

Click above for a high-res gallery of the Fox/Artisan Lexus IS-F.

The 2009 Lexus IS-F is slated to get some serious attention at SEMA, and Fox Marketing and Artisan are out to prove that show and go aren't mutually exclusive.

The plan is to create an IS-F that has the power to match its presence, and to that end, Artisan developed a twin-turbo setup that huffs compressed oxygen into a 5.0-liter V8 equipped with JE pistons and Crower rods. With a Mishimoto radiator, an Artisan exhaust, a healthy amount of boost and a thorough tune, Artisan is estimating over 600 hp at the rear wheels.

Aesthetically, the team sought to compliment the stock IS-F's styling, so they've fitted a bespoke body kit consisting of custom front and rear bumpers, and a set of side-skirts that cleanly integrate into the blistered rear fenders. iForged rollers fill the wheel wells, sized 20x9.5-inches in front and 20x11.5-inches in the rear, and wrapped in Toyo T1R tires (255/35R20 front and 305/30R20 rear). The Glasurit Sunset Orange hue is courtesy of BASF, and according to Brian Fox, they'll be blacking out the headlamps, grille and emblems to tie everything together.

Artisan plans to have its IS-F exhaust on sale next month, and when we check out the Lexus booth this November, we'll be able to see Fox/Artisan's efforts in person, along with a handful of other tuned and tweaked IS-Fs.

Click above for a gallery of the HKS Nissan GT-R GT570.

Serious Nissan GT-R tuners aren't coming out of the woodwork – yet – but one of Japan's largest aftermarket firms has thrown its hat into the ring, and to good effect. HKS will begin offering its GT570 kit to consumers in Japan later this year (no word on U.S. distribution) and as it's name implies, output is getting close to the 600 hp mark. The package includes new wastegate actuators for the stock turbos and an electronic boost controller, along with aluminum intercooler piping, silicon hose couplers and straight pipes that replace the stock catalytic converters, reducing back pressure, but negating the GT-R's road-legal status.

All of those tweaks add up to a total of – you guessed it – 570 PS, or 562 hp and 540 lb.-ft. of torque at the wheels. Check the gallery below to see the dyno charts and a few shots of the wastegate and plumbing mods.


[Source: SSH and HKS via 2009GTR]

Click above to enlarge

Hyundai made a huge splash at the New York Auto Show this year with its Genesis Coupe, and it's looking for a repeat performance next month at the SEMA Show in Las Vegas. The Koreans are working with several aftermarket tuners to create special coupes for the tuner show and they just passed along a photo of one of them. This example was created by HKS USA and includes the usual array of body work mods along with plenty of mechanical upgrades. Hyundai hasn't provided details on the engine re-work yet other than noting it's got an HKS GT Turbo package, so presumably this car will use the 2.0L turbo four-cylinder as its starting point. Since the guts of the engine are being beefed up, we can safely assume this thing will be running considerably higher boost than a stock Genesis. Hopefully the HKS Hipermax III fully-adjustable suspension will help make all this power usable on the street as well as the track. The Genesis Coupe may just yet prove to be a very formidable competitor to all those new Mustangs, Camaros and Challengers appearing over the next few months, and we can't wait for our chance to drive one.

[Source: Hyundai]

Click above for a high resolution image

Wald International has never been one to offer subtle styling. Whether it's the Lexus IS-F or the Mercedes-Benz CL, the Japanese tuner loves to create a bold look with vents, wings and wheels. The tuner recently turned its attention to the Nissan GT-R, and while we don't have official information on the car, the photos offer a good look at what the package will include. A vented front fascia and splitter, side skirts, rear fender flares, a rear diffuser, carbon fiber rear spoiler and 22-inch wheels all lend to the more aggressive look. We actually like the majority of the body kit, although we'd prefer the rear fender flares to be the same color as the body, and the larger wheels probably don't do much for the performance of the car. In the end, though, we'd probably spend our hard earned money on some of the Club Sport components from NISMO. Thanks for the tip, James!

[Source: Wald International via Nihoncar.com]

Click either image for a high-res gallery.

NISMO has finally released all the details on its line of upgrades for the R35 Nissan GT-R, and per usual, there's good news and bad news.

On the positive side, the parts are the typical blend of OEM quality and fitment, with a focus on tighter handling and weight reduction. The Club Sport tuning package includes the Chassis pack made up of race-tuned Bilstein Damptronic adjustable dampers sheathed in 18.5kg/mm (front) and 9.6 kg/mm (rear) springs. The combination of rock-hard coils and adjustable damping at both low and high speeds should make the GT-R stickier in the corners and more stable while bombing through a fast sweeper. Rounding out the handling package is a set of Rays forged aluminum wheels, sized 20x9.5-inches in front (+45mm offset) and 20x10.5-inches (+25mm offset) in the rear, and wrapped in Bridgestone RE070R run-flats, sized 225/40 and 285/35, front and rear. These are rumored to be the same rollers we'll see on the Spec-V when it's unveiled in Paris this October.

The rest of the parts focus on weight reduction, beginning with a lightweight axle-back exhaust that drops 11 pounds from the GT-R's curb weight, along with a carbon fiber undertray that reduces air turbulence and parasitic drag. Upgraded carbon-fiber backed and leather-trimmed seats are also part of the package, which retains the side airbags but nixes the electronic controls, reducing weight by another 13 pounds total. Naturally, some NISMO badging rounds out the upgrades.

Now here's the bad news: the parts are only available in Japan as a package, can only be installed by 12 NISMO-authorized shops and come in at a whopping ¥5,460,000 (over $50,000). However, some U.S. importers have already worked out a distribution deal with NISMO, but for those of us in the States, we don't get the added benefit of the three-year/60,000 km warranty.


[Source: NISMO via JPCNews]

Click above to view more of the RENNtech GLK

Of all the trucks that have proliferated into the Mercedes-Benz line-up, the GLK isn't exactly the most aggressive. But according to the latest reports, Mercedes is lining up an array of aftermarket tuners at the SEMA show to infuse what appears to be more than a little testosterone into the compact sport-ute.

First up to bat is RENNtech, the Florida-based company responsible, among other things, for the bringing the McLaren SLR 722 to America and actually getting it to produce 722 horsepower. RENNtech has taken inspiration from the Pikes Peak challenge – one of the most iconic and power-craven hill-climb events in the world – to create this hardcore GLK. Little is known in the way of details, but the vehicle is said to feature RENNtech's first performance hybrid drivetrain.

Brabus, Blvd Customs and Legendary Motorcars are also said to be preparing modified GLKs for SEMA, although Mercedes has not yet confirmed its participation in the show. While we wait for that, check out the images in the gallery below.

[Source: Modified Luxury & Exotics]

Click above for a high resolution image

Hurst is no stranger to offering up special edition Mopars. The 1970 Chrysler 300 Hurst packed a 440ci "TNT" V8 with 375 horsepower, as well as a fiberglass hood and trunk, Satin Tan leather interior, and a Spinnaker-White paint scheme with gold trim. Ok, that was nearly 40 years ago, but Hurst is still going strong and planning to renew its Mopar connection with a limited edition Dodge Challenger that will make its debut at SEMA this year. The Hurst Challenger will be available in four trim levels and include features like a supercharger system good for 500 horsepower, 5-spoke Hurst alloy wheels, and a "Pistol-Grip" Hurst shifter. Pricing will start at a $10,000 premium over the stock Challenger and could go as high as $20,000 for the top level model. Follow the jump for the press release from Hurst.

[Source: Hurst via Edmunds.com]

Click above for a high-res gallery of the Kesselman Mazda CX-7.

From afar, our first reaction was: what's a Matrix doing at the Mazda booth? Upon closer inspection, the dumped wagon you see above revealed itself as a tuned Mazda CX-7. Unfortunately, our Russian is about as good as our Swahili, so we weren't able to get any definitive details on what exactly has been done to Mazda's mid-level CUV. But the upgraded intercooler, ultra-low stance, gaudy body kit, stripped interior and six-point roll cage is proof that Russia's Kesselman tuning excels at answering questions that no one asked.

Click above for photo gallery

Now that BMW's 1-series has a solid presence on dealer lots, enthusiasts of the Roundel can start with lusty customizations that pay homage to the great BMWs of the past. In the case of this 135, we can say that BMW started it with its Concept tii that made the rounds in late 2007. Classic BMW in Texas plucked a 135i out of its stock for Projekt 1. Many of the "upgrades" that have been applied to the car are largely unneeded cosmetic geegaws like mirror covers and bodykit accents. We're down with the matte stripe job on the hood, and the vaguely described "retrofit front suspension" and performance exhaust system offer some tangible benefits; the exhaust even proves its worth with dyno sheets.

Basically, the exhaust and suspension are the only things on the list worth having, and those would cost about 5 grand, rather than the 12K price inflation this 135 is carrying. While we're sure Projekt 1 is a hoot to drive, we already have a hard time getting behind 1 Series pricing, no matter how brilliant the chassis is. Slapping a bunch of junk on it and bumping the price into the heady $50,000 neighborhood doesn't make it any more attractive. Still, if you want to have the most exclusive 135i on the social climber block, a Buy It Now of $55,372 will make it yours. Thanks for the tip, David!


[Source: eBay]